Chapter 21 Tools
P-792H v2 User’s Guide
278
Do not turn off the P-792H v2 while configuration file upload is in
progress.
After you see a “restore configuration successful” screen, you must then wait one
minute before logging into the P-792H v2 again.
Figure 124 Configuration Upload Successful
The P-792H v2 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 125 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default device IP
address (192.168.1.1). See Appendix C on page 411 for details on how to set up
your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 126 Configuration Upload Error
To Next Page
Loading...
