Chapter 38 Troubleshooting
P-792H v2 User’s Guide
400
I cannot Telnet to the P-792H v2.
See the troubleshooting suggestions for I cannot see or access the Login screen in
the web configurator. Ignore the suggestions about your browser.
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to
upload new firmware.
See the troubleshooting suggestions for I cannot see or access the Login screen in
the web configurator. Ignore the suggestions about your browser.
38.3 Internet Access
I cannot access the Internet.
1 Check the hardware connections, and make sure the LEDs are behaving as
expected. See the Quick Start Guide and Section 1.4 on page 27.
2 Make sure you entered your ISP account information correctly in the wizard. These
fields are case-sensitive, so make sure [Caps Lock] is not on.
3 Disconnect all the cables from your device, and follow the directions in the Quick
Start Guide again.
4 If the problem continues, contact your ISP.
I cannot access the Internet anymore. I had access to the Internet (with the P-
792H v2), but my Internet connection is not available anymore.
1 Check the hardware connections, and make sure the LEDs are behaving as
expected. See the Quick Start Guide and Section 1.4 on page 27.
2 Turn the P-792H v2 off and on.
To Next Page
Loading...
