Chapter 14 802.1Q/1P
P-792H v2 User’s Guide
199
14.3 The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID and assign traffic priority for each port. Click
Advanced > 802.1Q/1P > Port Setting to display the following screen.
Figure 91 Advanced > 802.1Q/1P > Port Setting
Default
Gateway
Select the default gateway for the VLAN group.
Ports This field displays the types of ports available to join the VLAN group.
Control Select Fixed for the port to be a permanent member of the VLAN group.
Select Forbidden if you want to prohibit the port from joining the VLAN
group.
Tx Tag Select Tx Tagging if you want the port to tag all outgoing traffic
trasmitted through this VLAN. You select this if you want to create VLANs
across different devices and not just the P-792H v2.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 60 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
