ZyXEL Communications P-792H - Configuring a Filter Set

Chapter 32 Filter Configuration
P-792H v2 User’s Guide
342
32.2 Configuring a Filter Set
The P-792H v2 includes filtering for NetBIOS over TCP/IP packets by default. To
configure another filter set, follow the procedure below.
1 Enter 21 in the main menu to open menu 21.
Figure 176 Menu 21: Filter and Firewall Setup
2 Enter 1 to bring up the following menu.
Figure 177 Menu 21.1: Filter Set Configuration
3 Select the filter set you wish to configure (1-12) and press [ENTER].
4 Enter a descriptive name or comment in the Edit Comments field and press
[ENTER].
5 Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.1 -
Filter Rules Summary.
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
Menu 21.1 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 NetBIOS_WAN 7 _______________
2 NetBIOS_LAN 8 _______________
3 TELNET_WAN 9 _______________
4 PPPoE 10 _______________
5 FTP_WAN 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A