Chapter 19 System Settings
P-792H v2 User’s Guide
250
19.3 The Time Setting Screen
Use this screen to configure the P-792H v2’s time based on your local time zone.
To change your P-792H v2’s time and date, click Maintenance > System > Time
Setting. The screen appears as shown.
Figure 112 Maintenance > System > Time Setting
The following table describes the fields in this screen.
Table 78 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Time
Current Time This field displays the time of your P-792H v2.
Each time you reload this page, the P-792H v2 synchronizes the time
with the time server.
Current Date This field displays the date of your P-792H v2.
Each time you reload this page, the P-792H v2 synchronizes the date
with the time server.
Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you
configure a new time and date, Time Zone and Daylight Saving at the
same time, the new time and date you entered has priority and the
Time Zone and Daylight Saving settings do not affect it.
To Next Page
Loading...
