ZyXEL Communications P-792H - Firewall Setup; Chapter 31 Firewall Setup; Using P-792 H V2 SMT Menus; Activating the Firewall

P-792H v2 User’s Guide
337
CHAPTER 31
Firewall Setup
Use this menu to activate or deactivate the firewall.
31.1 Using P-792H v2 SMT Menus
From the main menu enter 21 to go to Menu 21 - Filter and Firewall Setup to
display the screen shown next.
Figure 172 Menu 21: Filter and Firewall Setup
31.1.1 Activating the Firewall
Enter option 2 in this menu to bring up the following screen. Press [SPACE BAR]
and then [ENTER] to select Yes in the Active field to activate the firewall. The
firewall must be active to protect against Denial of Service (DoS) attacks. Use the
web configurator to configure firewall rules. Use the web configurator or SMT
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup