Chapter 31 Firewall Setup
P-792H v2 User’s Guide
338
menu 15 to configure the LAN-to-WAN Set Name and WAN-to-LAN Set
Name.
Figure 173 Menu 21.2: Firewall Setup
Note: It is recommended to configure the firewall rules using the web configurator.
Menu 21.2 - Firewall Setup
The firewall protects against Denial of Service (DoS) attacks when
it is active. The default Policy sets
1. allow all sessions originating from the LAN to the WAN and
2. deny all sessions originating from the WAN to the LAN
You may define additional Policy rules or modify existing ones but
please exercise extreme caution in doing so
Active: Yes
LAN-to-WAN Set Name: ACL Default Set
WAN-to-LAN Set Name: ACL Default Set
Please configure the Firewall function through Web Configurator
To Next Page
Loading...
