P-792H v2 User’s Guide
397
CHAPTER 38
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• P-792H v2 Access and Login
• Internet Access
• Network Connections
38.1 Power, Hardware Connections, and LEDs
The P-792H v2 does not turn on. None of the LEDs turn on.
1 Make sure the P-792H v2 is turned on.
2 Make sure you are using the power adaptor or cord included with the P-792H v2.
3 Make sure the power adaptor or cord is connected to the P-792H v2 and plugged
in to an appropriate power source. Make sure the power source is turned on.
4 Turn the P-792H v2 off and on.
5 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.4 on
page 27.
2 Check the hardware connections.
To Next Page
Loading...
