Chapter 36 Menus 24.8 to 24.11
P-792H v2 User’s Guide
387
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 -
System Maintenance - Call Control, as shown in the next table.
Figure 219 Menu 24.9: System Maintenance - Call Control
36.2.1 Budget Management
Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1
from Menu 24.9 - System Maintenance - Call Control to bring up the following
menu. Not all fields are available on all models.
Figure 220 Menu 24.9.1 - Budget Management
The total budget is the time limit on the accumulated time for outgoing calls to a
remote node. When this limit is reached, the call will be dropped and further
outgoing calls to that remote node will be blocked. After each period, the total
budget is reset. The default for the total budget is 0 minutes and the period is 0
hours, meaning no budget control. You can reset the accumulated connection time
in this menu by entering the index of a remote node. Enter 0 to update the screen.
The budget and the reset period can be configured in menu 11.1 for the remote
node.
Menu 24.9 - System Maintenance - Call Control
1. Budget Management
Menu 24.9.1 - Budget Management
Remote Node Connection Time/Total Budget Elapsed Time/Total Period
1.MyISP No Budget No Budget
2.-------- --- ---
3.-------- --- ---
4.-------- --- ---
5.-------- --- ---
6.-------- --- ---
7.-------- --- ---
8.-------- --- ---
Table 138 Menu 24.9.1 - Budget Management
FIELD DESCRIPTION EXAMPLE
Remote Node Enter the index number of the remote node
you want to reset (just one in this case)
1
Connection Time/
Total Budget
This is the total connection time that has
gone by (within the allocated budget that
you set in menu 11.1).
5/10 means that 5
minutes out of a total
allocation of 10 minutes
have lapsed.
To Next Page
Loading...
