Chapter 21 Tools
P-792H v2 User’s Guide
276
After you see the Firmware Upload in Progress screen, wait two minutes
before logging into the P-792H v2 again.
Figure 120 Firmware Upload In Progress
The P-792H v2 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 121 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Firmware screen.
Figure 122 Error Message
Browse... Click this to find the .bin file you want to upload. Remember that you
must decompress compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two
minutes.
Table 101 Maintenance > Tools > Firmware (continued)
LABEL DESCRIPTION
To Next Page
Loading...
