Chapter 37 Schedule Setup
P-792H v2 User’s Guide
395
The following table describes the labels in this menu.
Table 142 Menu 26.1: Schedule Set Setup
FIELD DESCRIPTION
Active Press [SPACE BAR] to select Yes or No. Choose Yes and press
[ENTER] to activate the schedule set.
Start Date Should this schedule set recur weekly or be used just once only?
Press the [SPACE BAR] and then [ENTER] to select Once or Weekly.
Both these options are mutually exclusive. If Once is selected, then
all weekday settings are N/A. When Once is selected, the schedule
rule deletes automatically after the scheduled time elapses.
How Often Enter the start date when you wish the set to take effect in year -
month-date format. Valid dates are from the present to 2036-
February-5.
Once
Date If you selected Once in the How Often field above, then enter the
date the set should activate here in year-month-date format.
Weekdays If you selected Weekly in the How Often field above, then select
the day(s) when the set should activate (and recur) by going to that
day(s) and pressing [SPACE BAR] to select Yes, then press [ENTER].
Start Time Enter the start time when you wish the schedule set to take effect in
hour-minute format.
Duration Enter the maximum length of time this connection is allowed in
hour-minute format.
Action Forced On means that the connection is maintained whether or not
there is a demand call on the line and will persist for the time period
specified in the Duration field.
Forced Down means that the connection is blocked whether or not
there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a
demand call on the line. Disable Dial-On-Demand means that this
schedule prevents a demand call on the line.
To Next Page
Loading...
