ZyXEL Communications P-792H - Page 293

Chapter 24 General Setup
P-792H v2 User’s Guide
293
press [SPACE BAR] to select Yes in the Edit Dynamic DNS field. Press [ENTER] to
display Menu 1.1 - Configure Dynamic DNS (shown next).
Figure 135 Menu 1.1: Configure Dynamic DNS
Follow the instructions in the next table to configure Dynamic DNS parameters.
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= No
DDNSType= DynamicDNS
Host 1=
Host 2=
Host 3=
Username=
Password= ********
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
DDNS Server Auto Detect IP Address= No
Use Specified IP Address= No
Use IP Address= N/A
Table 109 Menu 1.1: Configure Dynamic DNS
FIELD DESCRIPTION
Service
Provider
This is the name of your Dynamic DNS service provider.
Active Press [SPACE BAR] to select Yes and then press [ENTER] to make
dynamic DNS active.
DDNSType Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have
the Dynamic DNS service.
Select StaticDNS if you have the Static DNS service.
Select CustomDNS if you have the Custom DNS service.
Host 1-3 Enter up to three host names in these fields.
Username Enter your user name.
Password Enter the password assigned to you.
Enable
Wildcard
Option
Your P-792H v2 supports DYNDNS Wildcard. Press [SPACE BAR] and then
[ENTER] to select Yes or No. This field is N/A when you choose DDNS
client as your service provider.
Enable Off
Line Option
This field is only available when CustomDNS is selected in the DDNS
Type field. Press [SPACE BAR] and then [ENTER] to select Yes. When Yes
is selected, http://www.dyndns.org/ traffic is redirected to a URL that
you have previously specified (see www.dyndns.org
for details).