Chapter 27 Internet Access Setup
P-792H v2 User’s Guide
305
Network
Address
Translation
Network Address Translation (NAT) allows the translation of an Internet
protocol address used within one network (for example a private IP
address used in a local network) to a different IP address known within
another network (for example a public IP address used on the Internet).
Choose None to disable NAT.
Choose SUA Only if you have a single public IP address. SUA (Single
User Account) is a subset of NAT that supports two types of mapping:
Many-to-One and Server.
Choose Full Feature if you have multiple public IP addresses. Full
Feature mapping types include: One-to-One, Many-to-One (SUA/
PAT), Many-to-Many Overload, Many- One-to-One and Server. When
you select Full Feature you must configure at least one address mapping
set.
Please see Chapter 8 on page 101 for a more detailed discussion on the
Network Address Translation feature.
Address
Mapping Set
This field is enabled if the Network Address Translation is Full
Feature.
Enter the number of the address mapping set you want to use for your
Internet connection.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to
Confirm…” to save your configuration, or press [ESC] at any time to cancel.
Table 114 Menu 4: Internet Access Setup (continued)
FIELD DESCRIPTION
To Next Page
Loading...
