Chapter 28 Remote Node Setup
P-792H v2 User’s Guide
313
page 339. For PPPoE or PPTP encapsulation, you have the additional option of
specifying remote node call filter sets.
Figure 146 Menu 11.5: Remote Node Filter
The following table describes the labels in this menu.
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Table 117 Menu 11.5: Remote Node Filter
FIELD DESCRIPTION
Input Filter Sets
protocol filters Enter up to four filter sets. If you enter more than one, separate
each one with a comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate
each one with a comma ( , ).
Output Filter Sets
protocol filters Enter up to four filter sets. If you enter more than one, separate
each one with a comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate
each one with a comma ( , ).
To Next Page
Loading...
