ZyXEL Communications P-792H - Page 332

Chapter 30 NAT Setup
P-792H v2 User’s Guide
332
7 When finished, menu 15.1.1 should look like as shown in Figure 168 on page 333.
Figure 166 Example 3: Menu 11.3
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment = Dynamic Ethernet Addr Timeout(min)= N/A
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A
NAT= SUA Only
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=