ZyXEL Communications P-792H - Page 335

Chapter 30
P-792H v2 User’s Guide
335
Follow the steps outlined in example 3 above to configure these two menus as
follows.
Figure 171 Example 4: Menu 15.1.1.1: Address Mapping Rule
After you’ve configured your rule, you should be able to check the settings in
menu 15.1.1 as shown next.Example 4: Menu 15.1.1: Address Mapping Rules
Menu 15.1.1.1 Address Mapping Rule
Type= Many-to-Many No Overload
Local IP:
Start= 192.168.1.10
End = 192.168.1.12
Global IP:
Start= 10.132.50.1
End = 10.132.50.3
Server Mapping Set= N/A
Menu 15.1.1 - Address Mapping Rules
Set Name= Example4
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- --
1. 192.168.1.10 192.168.1.12 10.132.50.1 10.132.50.3 M-M N+
2.
3.
4.
5.
6.
7.
8.
9.
10.
Action= None Select Rule= N/A