EasyManua.ls Logo

ZyXEL Communications P-792H - Page 346

ZyXEL Communications P-792H
472 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 32 Filter Configuration
P-792H v2 User’s Guide
346
IP Addr Enter the source IP Address of the packet you wish to filter. This field is
ignored if it is 0.0.0.0.
IP Mask Enter the IP mask to apply to the Source: IP Addr.
Port # Enter the source port of the packets that you wish to filter. The range of
this field is 0 to 65535. This field is ignored if it is 0.
Port # Comp Press [SPACE BAR] and then [ENTER] to select the comparison to apply
to the source port in the packet against the value given in Source: Port
#.
Options are None, Equal, Not Equal, Less and Greater.
TCP Estab This field is applicable only when the IP Protocol field is 6, TCP. Press
[SPACE BAR] and then [ENTER] to select Yes, to have the rule match
packets that want to establish a TCP connection (SYN=1 and ACK=0); if
No, it is ignored.
More Press [SPACE BAR] and then [ENTER] to select Yes or No. If Yes, a
matching packet is passed to the next filter rule before an action is
taken; if No, the packet is disposed of according to the action fields.
If More is Yes, then Action Matched and Action Not Matched will be
N/A.
Log Press [SPACE BAR] and then [ENTER] to select a logging option from the
following:
None – No packets will be logged.
Action Matched - Only packets that match the rule parameters will be
logged.
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
Both – All packets will be logged.
Action
Matched
Press [SPACE BAR] and then [ENTER] to select the action for a matching
packet.
Options are Check Next Rule, Forward and Drop.
Action Not
Matched
Press [SPACE BAR] and then [ENTER] to select the action for a packet not
matching the rule.
Options are Check Next Rule, Forward and Drop.
When you have Menu 21.1.1.1 - TCP/IP Filter Rule configured, press [ENTER] at the
message “Press ENTER to Confirm” to save your configuration, or press [ESC] to cancel.
This data will now be displayed on Menu 21.1.1 - Filter Rules Summary.
Table 128 Menu 21.1.1.1: TCP/IP Filter Rule
FIELD DESCRIPTION

Table of Contents

Other manuals for ZyXEL Communications P-792H

Related product manuals