1-3
remote-ping entry(admin administrator, tag icmp) test result:
Destination ip address:1.1.1.99
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 2/5/2
Square-Sum of Round Trip Time: 66
Last complete test time: 2000-4-2 7:59:54.7
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Table 1-1 Description on the fields of the display remote-ping results command
Field Description
Destination ip address Destination IP address
Send operation times Number of send operations
Receive response times Number of successful test operations
Min/Max/Average Round Trip Time Smallest/biggest/average round-trip time
Square-Sum of Round Trip Time The square sum of the round trip time
Last complete test time Time of the last successful test
SD Maximal delay Maximal delay from the source to the destination
DS Maximal delay Maximal delay from the destination to the source
Packet lost in test Packet lost ratio in the test.
Disconnect operation number
Number of forced disconnections by the opposite
side
Operation timeout number Number of timeout times in the test operation
System busy operation number
Number of test failures because the system is
busy
Connection fail number Number of connection failures
Operation sequence errors Number of received sequence error packets
Drop operation number Number of system resource allocation errors
Other operation errors Number of other errors
# Use the display remote-ping history command to display test results.
<Sysname> display remote-ping history administrator icmp
remote-ping entry(admin administrator, tag icmp) history record:
Index Response Status LastRC Time
1 1 1 0 2004-11-25 16:28:55.0
To Next Page
Loading...
