1-4
2 1 1 0 2004-11-25 16:28:55.0
3 1 1 0 2004-11-25 16:28:55.0
4 1 1 0 2004-11-25 16:28:55.0
5 1 1 0 2004-11-25 16:28:55.0
6 2 1 0 2004-11-25 16:28:55.0
7 1 1 0 2004-11-25 16:28:55.0
8 1 1 0 2004-11-25 16:28:55.0
9 1 1 0 2004-11-25 16:28:55.9
10 1 1 0 2004-11-25 16:28:55.9
Table 1-2 Description on the fields of the display remote-ping history command
Field Description
Index Index of the displayed information
Response
Round trip test time, in milliseconds, or the timeout time. 0 means
the test fails.
Status
Value of the test result. See the following detailed description:
1: responceReceived. It means response is received.
2: unknown. It means unknown error.
3: internalError. It means system internal error.
4: requestTimeOut. It means timeout before response.
5: unknownDestinationAddress. It means the destination address is
unknown.
6: noRouteToTarget. It means there is no route to the destination
address.
7: interfaceInactiveToTarget. It means the interface of destination
address is not activated.
8: arpFailure. It means ARP operation fails.
9: maxConcurrentLimitReached. It means the maximum limit of
concurrent accesses is reached.
10: unableToResolveDnsName. It means it is unable to resolve the
DNS name.
11: invalidHostAddress. It means the invalid host address.
LastRC
Receive the last response code based on the implementation ways.
With ICMP echo enabled, if the system receives ICMP response
which includes ICMP_ECHOREPLY(0), the probe has succeeds.
ICMP response often defined in the file containing ip_icmp.
Time Test time
frequency
Syntax
frequency interval
undo frequency
To Next Page
Loading...
