Product and Safety Information
10
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
Usage of third party software
Aastra 400 products comprise, or are partially based on, third-party software prod-
ucts. The licence information for these third-party products is listed in the user's
guide of the Aastra 400 product in question (see also 7. 6).
Exclusion of Liability
1)
All parts and components of the Aastra 400 communication solution are manufac-
tured in accordance with ISO 9001 quality guidelines. The relevant user information
has been compiled with the utmost care. The functions of the Aastra 400 products
have been tested and approved after comprehensive conformity tests. Nonethe-
less errors cannot be entirely excluded. The manufacturers shall not be liable for
any direct or indirect damage that may be caused by incorrect handling, improper
use, or any other faulty behaviour. Potential areas of particular risk are signalled in
the appropriate sections of the user information. Liability for loss of profit shall be
excluded in any case.
Environment
Aastra 400 products are delivered in recycled, chlorine-free corrugated cardboard
packaging. The parts are also wrapped inside a protective fleece made of polyeth-
ylene foam fleece or polyethylene film for added protection during shipping. The
packaging is to be disposed of in accordance with the guidelines stipulated under
current legislation.
Aastra 400 products contain plastics based on a pure ABS, sheet steel with
an aluminium-zinc or zinc finish, and epoxy resin-based PCBs. These mate-
rials are to be disposed of in accordance with the guidelines stipulated
under current legislation.
Aastra 400 products are disassembled exclusively using detachable screwed con-
nections.
1)
Not valid for Australia. For Australia, see "Limited Warranty (Australia only)", page 296.
To Next Page
Loading...
Need help?
General