Aastra 470 - Emergency Upload of the System Software

Operation and Maintenance
217
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
6. 2. 1. 3 Emergency Upload of the system software
An Emergency Upload has to be activated whenever a standard software upload is
not possible, has proved faulty or to replace a Flash card. To ensure a successful
Emergency Upload, proceed as follows:
The Emergency Upload is carried out via the LAN interface using the Upload Man-
ager:
1. Set the system to boot mode using the navigation keys (see "Boot mode",
page 242).
2. Call up the AMS Upload Manager.
3. Enter user name and password (changed) of a user account.
Note:
To perform the upload, the user account must be assigned an authori-
zation profile for which the FTP interface access is enabled (see "User
Access Control", page 189).
4. Select configuration server.
5. Select a software package (zip file). If necessary, load a new software package
beforehand using the Add button.
6. Select EUL via LAN and use the Settings button to enter the IP address.
7. Click the Upload button.
 The Emergency Upload is started.
Note:
Depending on the type of communication server, the upload process
(especially unpacking the software package) can take some time.