Configuration
196
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
5. 3. 4 Password-free access
The control panel on the front panel can activate a function that enables via AMS
password-free, local access with administration right User access control. Local ac-
cess is then possible using a LAN cable. This is useful for example if all the pass-
words have been lost.
There is no password-free access for remote maintenance.
Password-free access with the System Assistant on the Office 45 is also possible,
but without the possibility of changing the status of the remote access.
5. 3. 5 Automatic exit from the configuration
Access to the system configuration will be interrupted if during the set disconnect
time (AMS Shell menu: View / Options under Online connection) you do not make
any changes to a parameter value or do not make use of the navigation system.
5. 3. 6 Access log
An access log is drawn up for each user account so that the history of accesses to
the configuration can be tracked. Denied access attempts using erroneous or incor-
rectly type passwords are also logged.
The logs can be read by any user.
Retrieving the log data
The system monitors all the accesses and failed access attempts and saves them in
the file system of the communication server. These lists can be retrieved locally or
remotely.
CLIP verification
If the setting CLIP required is set to Yes in the configuration, remote retrieval is possi-
ble only if the retrieving party logs in using a CLIP. The CLIP number is also recorded
by the access log.
Entering the processes in the log
Each access attempt generates an entry in the corresponding list.
In the case of a remote maintenance access an entry will not be generated if re-
mote maintenance is barred or if CLIP required is set to Yes in the configuration and
no CLIP is received.
To Next Page
Loading...
Need help?
General