Aastra 470 System Manual

Operation and Maintenance
274
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
6. 6. 2. 9 Overload code displays Office 135 / Office 160
The overload code displays on the DECT cordless phones Office 135 and Office 160
can be activated and deactivated using the following key combination (toggle
function):
Long-click key 5 and then long-click key 3 (long = long-click > 2 seconds).
The overload code display is always deactivated after system initialization.
Tab. 112 DECT overload code displays Office 135
Code Name Error description Error handling
05 / 06 IPEI Not Accepted Cordless phone already logged on to
system under different number.
• Check existing subscriber No.
under "Config."; log that particular
subscriber off
• Try again
10 Authentication failed Logon error Try again
51 DL 04 Expiry Timer (on cordless phone) has expired Try again
70 Timer Expired MM timer in system has expired (dur-
ing logon)
Try again
44 Failure to set up traffic
bearer
Connection cannot be set up as too
many cordless phones are phoning
within the same range
• Try again
• If still unsuccessful after several
attempts, "Reset cordless phone"
(normally it is enough to press key
0 with a long keystroke and switch
back on)
45 No Quiet Channel No channel available, same as code 44 Same measures as for code 44
80 Reject Location Area.
Not allowed. Mis-used
to indicate wrong
"design" version.
Wrong mode during logon. Logon to the system < I5
• Office 135: Long-click "Home"
Logon to the system > I5:
• Office 135: Short-click "Home"

Aastra 470 Specifications

General

Brand	Aastra
Model	470
Category	Telephone
Language	English