Operation and Maintenance
273
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
6. 6. 2. 8 Long-clicks on Aastra DECT cordless phones
In normal DECT cordless phone operation, long-clicking the following keys ac-
cesses additional functions directly.
Tab. 111 Long-clicks on Aastra DECT cordless phones
Function Office 135 Office 160
Aastra
600c/d
In a list box: change scroll direction. Longclick ">" switches to "<" and vice
versa.
Foxkey
right
Foxkey
right
—
Direct access to the configuration menu M M —
Switch cordless phone on/off C, 0 0 End key
Switches over to the next radio system temporarily. 1 1 2
Indicates the radio system parameters (cordless phone IPEI and radio sys-
tem PARK). With each additional call the next radio system is indicated in
each case if there are other logons.
22—
Indicates the cordless phone’s internal diagnostics. 3 3 —
Switches to a special alarm menu of the cordless phone. — — 3
1)
1)
Aastra 630d only
Indicates the data of the valid radio unit (“Show Measurement Mode”, see
“Planning DECT Systems” in the User’s Guide).
44—
Indicates the cordless phone’s software version. 5 5 —
Jumps to the cordless phone’s service menu. — — 5
Indicates battery charge status and the type. 6 — —
Indicates the communication server’s software version. 7 7 —
Activates "semi" key lock. See Operating Instructions for details. 8 8 —
Activates key lock. See Operating Instructions for details. 9 9 #
Switch dialling type DTMF on/off. See Operating Instructions for details. —
Switch tone ringing on/off. — —
Jumps to the cordless phone’s tone ring menu. Loud-
speaker
key
Loud-
speaker
key
—
Menu for display contrast, display backlighting, area tone and overload
tone. See Operating Instructions for details.
##—
Configuration mode for hotkey. See Operating Instructions for details. Hotkey Hotkey Hotkey
Switch error messages on/off (default value: off). Messages relating to the
following errors cannot be switched on/off: HS logon error, incorrect loca-
tion registration, no locatable radio unit, network, system or radio unit over-
load.
5 + 3 5 + 3 —