Annex
292
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
Fig. 92 Greek keyboard assignment
Note:
The keyboard can be switched from Greek to Latin using "Alt Tab" subject
to certain restrictions with regard to special characters. This means that
Latin characters can be keyed in via the AKB even though the communi-
cation server language is set to Greek.
7. 4. 4 Function commands (macros)
Function commands are used mainly for automatically activating/ deactivating fea-
tures using the function keys of the system phones. The following function com-
mands are available:
Tab. 139 Function commands for system phones
Function command Meaning
"A" Seize line with maximum priority
1)
1)
Available only with the key telephones.
"I" Seize line
"X" Disconnect
"P" Pause 1 second before next action
"Lxx" Seize line xx (line keys)
1)
"N" Enter call number keyed in during call preparation
"." Control keys function
"Z" Activate/deactivate DTMF mode
"R" Use call number last dialled
"Y" End call and reseize line
2)
2)
Not available for Office 10.
To Next Page
Loading...
