Configuration
197
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
5. 4 Enabling remote access
With remote access the user is authenticated using his user name and password.
The user account must also be assigned an authorization profile in which the inter-
face access Remote maintenance via dial-up access is enabled.
5. 4. 1 Access enabled by local users
Remote access can be enabled in three ways:
• Using function codes (see page 198)
• With the AMS Configuration Manager
• Via the system assistant on the Office 45
It can be revoked again automatically or manually.
All enabling types have equal authorization status. This means that remote access
can be enabled using a function code for example, and then barred again using the
Remote maintenance setting in AMS or with the System Assistant on the Office 45.
When remote maintenance is activated, the event message Remote maintenance
on is sent to the local printer and to all the terminals registered in message group
16.
Remote access can be enabled or barred using the function codes both from the
idle state and the talk state, e.g. after an enquiry.
The authorization to activate/deactivate remote access using function codes can
be allocated in the user configuration (Remote maintenance = Yes).
After a first start of the communication server, the authorizations of all users are re-
stricted.
Note:
It is advisable not to keep the remote access authorization permanently
activated. This ensures that the communication server data cannot be
manipulated from a remote location by unauthorized persons.
To Next Page
Loading...
Need help?
General
