Configuration
193
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
5. 3. 2 Passwords
To ensure that the communication server can only be configured with AMS by au-
thorized personnel, access to both the communication server configuration and
the communication server itself is protected by passwords. AMS and communica-
tion server password management can be synchronised.
Note:
AMS keeps a list of user accounts and their assigned authorization pro-
files. When AMS is started, a check is carried out to see whether the user’s
OS name (operating system name) is on the list of user accounts. If so, the
user is authorized to configure offline without entering his password
(auto login). If the communication server password is identical to the
user's password, he can even access the communication server without
password and configure online.
5. 3. 2. 1 Default user account
To access the default user account (Default User Account) enter the following:
Tab. 86 Default password
It is advisable to change at least the standard password immediately to prevent un-
authorized access to the user access control.
The default password for the communication server and AMS is identical.
Note:
It is not possible to configure the communication server with a default
password. During the initial commissioning or after initialization you are
prompted to change the default password during the connection set-up
with the communication server. This ensures that unauthorized person-
nel cannot manipulate the communication server data from a remote
location once access for remote maintenance has been enabled.
See also:
The control panel on the front panel is PIN-protected (see "PIN control
panel", page 240).
User name admin
Password 33aastra
To Next Page
Loading...
