Product and Safety Information
11
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
1. 2 Safety Information
Reference to hazards
Hazard warnings are affixed whenever there is a risk that improper handling may
put people at risk or cause damage to the Aastra 400 product. Please take note of
these warnings and follow them at all times. Please also take note in particular of
hazard warnings contained in the user information.
Operating safety
Aastra 400 communication servers are operated on 230 VAC mains power. Commu-
nication servers and all their components (e.g. telephones) will not operate when
mains power fails. Interruptions in the power supply will cause the entire system to
restart. A UPS system has to be connected up-circuit to ensure an uninterruptible
power supply. Up to a specific performance limit a Aastra 470 communication
server can also be operated redundantly using an auxiliary power supply. For more
information please refer to your communication server's system manual.
When the communication server is started for the first time, all the configuration
data is reset. You are advised to backup your configuration data on a regular basis
as well as before and after any changes.
Installation and operating instructions
Before you begin with the installation of the Aastra 400 communication server:
• Check that the delivery is complete and undamaged. Notify your supplier imme-
diately of any defects; do not install or put into operation any components that
may be defective.
• Check that you have all the relevant user documents at your disposal.
• During the installation follow the installation instructions for your Aastra 400
product and observe to the letter the safety warnings they contain.
Any servicing, expansion or repair work is to be carried out only by technical per-
sonnel with the appropriate qualifications.
To Next Page
Loading...
Need help?
General