Aastra 470 System Manual

Configuration
192
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
5. 3. 1. 4 Interface access
The following interfaces can be enabled or disabled:
• OIP
Allows the OIP server to access the communication server. This authorization is
not intended for individual persons.
• Office 45
Allows unlimited access to the configuration data via Office 45 (System Assis-
tant).
• FTP
Allows access to the FTP server of the communication server. Needs to be ena-
bled for software upload.
• Monitor
Permits access by monitors on the communication server for troubleshooting.
• First party CTI
Allows first-party applications to communicate with the communication server
via the IP network by means of the CTI interface. This authorization is not in-
tended for individual persons.
• Third-party CTI
Allows third-party applications to communicate with the PBX via the IP network
by means of the CTI interface. This authorization is not intended for individual
persons.
• ATAS
Allows third-party applications to communicate with the communication server
via the IP network by means of the ATAS interface. This authorization is not in-
tended for individual persons.
• Remote maintenance using dial-up access
Allows in principle access to the system by dialling a service number. Remote
maintenance itself, in the Maintenance main menu of the Configuration Man-
ager (CM_7.1), must be enabled.
• System Search
Allows IP parameters displayed in System Search to be modified directly.
• LDAP service
Allows LDAP clients to access the integrated LDAP server. LDAP clients can then
access the system phone book.

Aastra 470 Specifications

General

Brand	Aastra
Model	470
Category	Telephone
Language	English