Operation and Maintenance
277
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
Remarks
• The display on the event message header line ("1") indicates the number of
event messages that have occurred (max. 255). You can use the cursor keys to
scroll through the lines (not visible)(e.g. 4 events 1/2: 2 events on page 1,2
events on page 2)
• The last 254 entries can be displayed.
• The event entries record only the time of the error incident, not the time at
which it was remedied.
• More detailed information on triggering and printing event messages can be
found in "Event message concept", page 247.
See also:
Event messages can also be called up in the AMS Fault & Maintenance
Manager (see "Signal destination Event Log", page 267).
6. 6. 3. 2 Fault & Maintenance Manager
For information on the Fault & Maintenance Manager see "Event message concept",
page 247.
6. 6. 3. 3 Measuring equipment for cordless systems
The aids required for measuring out DECT systems are described under “Planning
DECT Systems” in the User’s Guide.
To Next Page
Loading...
Need help?
General