Operation and Maintenance
276
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
System failures menu item
Tab. 116 System failures display
The system's last 80 system failures (resets) are displayed. The resets are incre-
mented in the counter in the top right (0...255).
Significance of the display: Error type W = restart (watchdog), date, time
When printing, only the last 4 addresses are printed out.
Power failures menu item
Tab. 117 Power failures display
Only the restart time is recorded.
Event messages menu item
Tab. 118 Event messages display
The event messages are identical to the displays obtained when entering the con-
figuration with System Assistant on the Office 45. They are stored in event table 4
(see "Event message concept", page 247). The entries in the Maintenance menu re-
main stored until they are deleted with the Delete command.
DIST: xxxx Number of call distributions in the sys-
tem
DIST: 0000 0000: No call distribution defined
DDIN: xxxx Number of DDI numbers in the system DDIN: 0000 0000: No DDI numbers defined
ABB: xxxx Number of abbreviated dialling num-
bers in the system
ABB: 1000 1000: Default value unchanged
== SYSTEM FAILURES 52
W 15.09.10 13:32 011A59F2, 011A5A8C, 01156FFE
W 06/12/2010 13:32 011A59F7 011A5A82 01156FF1
== POWER FAILURES
01.12.10 16:13
== EVENT MESSAGES
01.12.10 00:01 OUTGOING CALL REJECTED TO LINE: 12.25
02/12/2010 09:15 TOO MANY EVENT MESSAGES
Display Description
Normal value /
idle state
Note
To Next Page
Loading...
Need help?
General