Aastra 470 - Fan-Out Panel FOP

Installation
156
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
4. 7. 4 Fan-out panel FOP
All interface cards with 16 or more interfaces have four-fold assigned RJ45 sockets.
With the fan-out panel FOP a total of 10 four-fold assigned RJ45 sockets can be split
to individual RJ45 sockets.
The fan-out panel (FOP) takes up the space of one height unit in a rack and can be
fitted directly above or below the communication server.
Fig. 62 Front panel, FOP fan-out-panel
Fan-out panels can also be offset, e.g. as floor distributors.
Connection
The diagram below shows the connection of an interface card 16DSI with termi-
nals. This card has 2 four-fold assigned RJ45 sockets. The 8 individually assigned
RJ45 sockets are connected directly while the 2 four-fold assigned sockets are
looped via the front panel of the fan-out-panel connector (FOP) strip using 2 patch
cables.



   
 



   
 



   
 



   
 



   
 