Operation and Maintenance
215
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
runs an automatic restart at the set time and restarts with the newly loaded system
software.
If there is insufficient storage space left in the Flash memory to update the system
software, the wave files (voice mail, announcement service and music on hold) can
be stored on the PC and deleted from the Flash memory. When the monitoring
phase is finished, the wave files can be reloaded to the communication server file
system (see "File system of the communications server", page 211).
If for whatever reasons the software upload is not possible or if a fault occurs dur-
ing the upload, the previous system software with the previous associated configu-
ration data remains activated.
If errors are detected in the system software during the time in which the newly
loaded system software is being monitored for fault-free operation, the previous
system software is reactivated.
Successful and failed software uploads are stored as event messages and sent to
the configured signal destinations.
See also:
For information on event messages and signal destinations, see "Event
message concept", page 247.
Initiating an upload process
To ensure a successful software upload, carry out the following preparatory steps:
1. Recommendation: User AMS to save the configuration data (Tools / Backup).
2. Save the wave files (voice mail, announcement service and Music on hold) (Tools
/ Managing audio data / Download audio data).
3. Call up the AMS Upload Manager.
4. Select the Configuration tab.
5. Enter user name and password (changed) of a user account.
Note: To perform the upload, the user account must be assigned an authoriza-
tion profile for which the FTP interface access is enabled (see "User Access Con-
trol", page 189).
6. Select the system type.
7. Select a software package (zip file). If necessary, load a new software package
beforehand using the Add button.
8. If a new licence code is required to operate the new system software, enter it un-
der Licence code.
To Next Page
Loading...
