Aastra 470 - Page 69

Expansion Stages and System Capacity
69
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
AastraSIP terminals Aastra 6730i
Aastra 6731i
Aastra 6735i
Aastra 6737i
Aastra 6753i
Aastra 6755i
Aastra 6757i
Aastra 6739i
Aastra 8000i
400 400
Aastra BluStar for PC 400 400
Standard SIP terminals 400 400
Aastra Mobile Client Controller 10 10
- Virtual terminals 400 600
Integrated mobile phones (with or without AMC) 255 255
Integrated mobile phones with a AMCC 30AMCC 130 30/150 30/150
BRI-S Terminals on DSI-S interfaces (total) 224 512 8
2)
Terminals as per ETSI standard
• ISDN terminals
• ISDN PC cards
• ISDN LAN routers
• ISDN Terminal Adapters
224 512
FXS Terminals on FXS interfaces (total) 228 600 1
Analogue, nationally approved terminals
• Pulse dialling (PUL)
• Frequency dialling (DTMF)
• Radio units for cordless phones
• Door intercoms with DTMF control functions
• Group 3 fax machines
3)
• Answering machines
• Modems
228 600
External audio equipment with line output 1 1 per node
External equipment can be switched via control outputs 228 600
External switches for controlling internal switch groups via
control inputs
228 600
General Bell 1 1 per node
1)
Operation on 2 DSI interfaces in each case
2)
Maximum of 2 simultaneous call connections.
3)
Transmission with the T.38 protocol is recommended for Fax over IP. The corresponding DSP resources need
to be allocated.
Interface Terminal type Terminal
per Aastra
470
per AIN
with Aastra
470 as Mas-
ter
per inter-
face