Advanced Navigation Boreas D90 - Page 5

9.1.3.10 Dual Antenna 64
9.1.3.11 Ethernet Settings 65
9.1.3.12 NTRIP Client 65
9.1.3.13 CAN Settings 67
9.1.3.14 Advanced 68
9.1.3.15 GNSSConfiguration 68
9.1.4 Tools Menu 70
9.1.4.1 Firmware Update 70
9.1.4.2 Logs 71
9.1.4.3 Viewing Logged Data 72
9.2 Using Boreas Manager 72
9.2.1 Software Changelog 73
9.2.2 System Requirements 74
9.2.3 Installation and Starting 74
9.2.4 Troubleshooting 74
9.2.4.1 Windows 74
9.2.4.2 Linux 76
9.2.5 Main View 77
9.2.5.1 Serial Port 77
9.2.5.2 Baud Rate 77
9.2.5.3 Connect / Disconnect 78
9.2.5.4 3D Map 78
9.2.6 View Menu 78
9.2.6.1 Communications 78
9.2.7 Configuration Menu 78
9.2.7.1 Configuration Export 78
9.2.7.2 Alignment 78
9.2.7.3 Port Mode and Baud Rates 80
9.2.7.4 GPIO 80
9.2.7.5 Odometer 81
9.2.7.6 GPIO Output 81
9.2.7.7 Gimbal 82
9.2.8 Tools Menu 83
9.2.8.1 Device Discovery 83
9.2.8.2 Firmware Update 84
9.2.8.3 Log Converter 85
9.2.8.4 NTRIP Client 85
9.2.8.5 Network Connect 86
9.2.8.6 Serial Passthrough 86
9.2.9 Logging 87
9.3 Using the Android App 87
9.4 Using ANPP 87
10 Interfacing 88
Page iv