48 Invalid Engine Configuration
Hardware error.
Reset. If the error persists, call for service.
49 Hardware Error
Reset. If the error persists, call for service.
50 Hardware Error
Reset. If the error persists, call for service.
51 Bridge Communication Error
An error occurred in communication between the image-
setter and the bridge.
Reset. If the error persists, call for service.
52 Bridge Jam Before Center Sensor
Open the media compartment and remove the top and
bottom bridge covers.
Look for media in the lower section of the bridge. If you
find no media in the bridge, lift the bridge up and look for
media protruding from the media slot. See Figures 6.2
and 6.3.
6–10
•
SelectSet Avantra User Guide
To Next Page
Loading...
