Optimum exposure, A–3
Optional equipment, 1–6
Out of Media, 6–3
Output mode and Feed and Cut
amount, 3–5
Output Mode button, 8–4
Output Side Punch Jam, 6–4
Output devices, 1–8
Overexposure, A–3
Oxidation, 9–15, A–4
P
Pan Light, 9–16
Panel light, 9–16
Pause button, 2–6
Pause Pending operating mode,
3–2, 3–3
Pause Screen, 2–2, 3–4
Photographic principles, A–1
Plate material, B–2
Plus button, 2–6
special features, 2–7
Polarizer Error, 6–7
Positive imaging mode, 3–28
PostScript, C–2
preset values, 9–11
Processor Alarm Signal, 6–6
Processor Communication Error,
6–14
Processor Error, 6–13
Processor Timeout button, 3–27
Processor Top Door Open, 6–13
Processor. See On-line processor
Processor messages, 9–28
Door Open, 9–29
Exit Jam, 9–29
Input Jam, 9–28
Job in Bridge, 9–28
Job in Proces, 9–28
Manual Start, 9–29
Motor Overload, 9–29
Progress bar, 2–2
and startup procedure, 2–2
and running jobs, 3–2
and test pages, 5–7
Punch mode status icons, 3–9
Punch trays, 7–15
I–8
•
SelectSet Avantra User Guide
To Next Page
Loading...
