R
Raster image processor, see RIPs
Reference band, 5–2
Reflection densitometer, 5–10
Repl. Empty, 9–4
Replenishment, 9–14, 9–18, A–4,
B–8
settings, B–10
standby, 9–15, B–9
rates, changing, 9–14
Reset procedure, 6–2
Resolution, 3–13
Retract Punches and Nips but-
ton, 3–25
Reverse Feed button, 3–25
Right Side Door Open, 6–8
Right reading imaging mode,
3–28
RIP Data Error, 6–5
RIP user tools, 3–1, C–2
RIPs
and startup procedure, 2–2
hardware, 1–8
software, 1–8
Run button, 2–6
Run Screen, 2–2, 3–2
Run state, processor, 9–4
S
Safety instructions, 1–11
Screens
Cassette Setup, 3–16
Configuration, 3–26
Feed Amounts, 3–22
Pause, 2–2, 3–4
Run, 2–2, 3–2
Utilities, 3–24
Setting on and off time, 9–9
Setting exposure, 3–18
Shut down procedure, 2–3
Single media supply engine sta-
tus display, 3–12
Software tools, 3–1
Spinner Speed Error, 6–5
Spot Aperture Jam, 6–5
Standby mode, and jog function,
9–5
Standby replenishment, 9–15,
B–9
Startup procedure
imagesetter, 2–2
processor, 9–2
Status icons, 2–3
engine, 3–11
job, 3–13
media, 3–8
punch mode, 3–9
Index
•
I–9
To Next Page
Loading...
