Agilent Technologies 5110 ICP-OES Service Manual

Agilent 5110/5100 ICP-OES Service Manual Agilent Restricted 277
10 Installation Guide (5110 ICP-OES)
Sample introduction setup
Sample introduction setup
The 5110 ICP-OES instruments will have had the sample introduction components that were
ordered with the instrument packed for safe transportation.
For the latest instructions on how to set up and install these components, please refer to the
online help.
Specifically:
1 Click the Windows Start button and choose Programs > ICP Expert > ICP Expert Help.
2 When the ICP Expert Help software appears, click the Hardware link to view step-by-step
instructions (including videos) on how to remove and install the various instrument
components. Below are some instructions on how to set up the most common types of
sample introduction components.

Agilent Technologies 5110 ICP-OES Specifications

General

Brand	Agilent Technologies
Model	5110 ICP-OES
Category	Laboratory Equipment
Language	English