114 Installation, Operation, and Maintenance
Part 2, Operation
6 Vials and Bottles
2 Place the crimp cap over the top of the vial.
3 Lift the vial into the crimper. Squeeze the handle until it reaches the
adjuster screw.
Figure 49 shows acceptable and unacceptable vial caps.
Check each vial for proper crimping:
1 Be sure there are no folds or wrinkles on the part of the cap that wraps
under the neck of the vial. To remove folds or wrinkles, turn the vial about
Figure 48 Crimping caps
Figure 49 Acceptable and unacceptable caps
Handle
Adjuster screw
Jaws
Crimp cap
Sample vial
Centered
No folds or wrinkles
Acceptable
Off-center
Folds and wrinkles
Unacceptable
To Next Page
Loading...
Need help?
General
