Agilent Technologies InfinityLab LC Series - Special Functions; Saving a Screenshot to USB Flash Drive

G4208A User’s Guide 107
2 Working with the Instant Pilot
Special Functions
Special Functions
Saving a Screenshot to USB Flash Drive
You may want to create a screenshot for
• adding it to a documentation or
• troubleshooting reasons.
To do so,
1 Insert the USB Flash Drive.
2 Wait until the USB Flash Drive has been initiated.
3 Press the key sequence . i (dot info).
The screenshot is saved as SCR-nn.BMP (where nn is a number) on the USB
Flash Drive. The figure can be opened on the PC with any graphic or word
processing application.