Agilent Technologies InfinityLab LC Series User Guide

G4208A User’s Guide 114
3 Running an Isocratic Analysis
Selecting a Signal
Selecting a Signal
1 Setup the signal parameters in the Method Information screen.
2 Select Status in the Welcome screen.
3 Press Plot.
4 Press Setup.
5 Choose a Detector Signal from the Available Signals list.
6 Press Done.
NOTE
You can choose several signals at a time. The plot function will display all signals
that are shown in the Selected Signals list box. Use the selection keys to navigate
within the list box and select the signal(s).

Agilent Technologies InfinityLab LC Series Specifications

General

Brand	Agilent Technologies
Model	InfinityLab LC Series
Category	Laboratory Equipment
Language	English