Agilent Technologies InfinityLab LC Series - Early Maintenance Feedback (EMF)

G4208A User’s Guide 48
1 Start-up Information
Maintenance Information
Early Maintenance Feedback (EMF)
In case you have set the EMF limits and the limit has been reached, a message
pops up.
Figure 29 Early Maintenance Feedback (EMF) - Message
1 The limits can be set in the EMF Setup screen.
Figure 30 Early Maintenance Feedback (EMF) - Setting the limits
actual, changes the color
depending on state:
green - below limit
yellow - limit exceeded
red - far above limit