G4208A User’s Guide 34
1 Start-up Information
Method Information
Method Information
1 To view/edit the method information, press the Method button from the
Welcome screen.
Figure 16 Method Screen
The screen displays complete or filtered information about module settings
and parameters of all modules.
Depending on the number of modules, you may have to scroll through the
display.
2 To change a parameter, scroll down to the field and press Edit or OK.
3 Using the To g gl e button switches between filtered and unfiltered view.
4 The Properties button opens the history / protection of the current method,
see
“Method File Protection” on page 72.
on-line information
in edit-mode the limits are
shown
To Next Page
Loading...
Need help?
General
