G4208A User’s Guide 140
5 Maintenance and Repair
Firmware Updates
Updating the Firmware Using The Wizard
1 To open the Maintenance - System information, press More from the
Welcome screen and select Maintenance.
Figure 94 Firmware Update Screen - Update Wizard
The Update Wizard allows you to define the modules to be updated. This
screen also shows the installed firmware revision versus the available.
2 Press Update Wizard and then Cont., or Abort to cancel the update process.
Only one firmware revision (set) should be stored on the USB Flash Drive. If more
than one firmware version for a module is available, the Instant Pilot will always
take the most recent firmware version. In this case, delete those versions not
required.
Module may become unusable
Do not disconnect the Instant Pilot or the USB Flash Drive while a firmware
update is running.
USB Flash Drive must be
active
Update Wizard allows
selected updates
To Next Page
Loading...
Need help?
General
