G4208A User’s Guide 113
3 Running an Isocratic Analysis
Creating a Sequence
Creating a Sequence
1 Select Sequence in the Welcome screen.
2 Press Insert and select Method.
3 Select Method named
ISO
and press OK.
4 Press Insert and select Sample.
If your sample is not in vial 1, you have to modify the vial number (also see
“Sequence - Automating Analyses” on page 84) .
5 Select File and select “Save As”.
6 Enter the sequence name as
ISO
using the numeric keys (see also “Saving a Sequence” on page 88).
7 Press Save to save the sequence.
8 Press Exit to leave the Sequence screen.
To Next Page
Loading...
