G4208A User’s Guide 150
5 Maintenance and Repair
Troubleshooting
Troubleshooting
Internal diagnostics continuously monitor the module’s condition and record any
unusual events in an electronic logbook, see
“Logbook Information” on page 43.
For example, missing vials or leaking solvent errors and record the errors in the
logbook together with the time and date of the occurrence. The logbook is self-
updating. All events are listed, even duplicates (up to 1000 entries). This logbook
can be saved to the USB Flash Drive. Screenshots also can be saved to the USB
Flash Drive, see
“Saving a Screenshot to USB Flash Drive” on page 107.
Troubleshooting the Instant Pilot
If your Instant Pilot does not work correctly, disconnect the module CAN
connector from the rear of the Agilent Series module it is attached to and
reconnect it.
If the problem still remains, then
• power down all connected devices and computers and wait 1 minute and then
restart, or
• try to use just one Agilent Series module.
If the problem still remains, call Agilent Technologies.
To Next Page
Loading...
Need help?
General
