Agilent Technologies InfinityLab LC Series - Removing the Instant Pilot

G4208A User’s Guide 20
1 Start-up Information
Removing the Instant Pilot
Removing the Instant Pilot
1 To remove the Instant Pilot, slightly angle the Instant Pilot (1.) and then lift it
from the holder (2.).
Figure 3 Removing the Instant Pilot
CAUTION
The CAN bus does not support hot plugging or unplugging.
Unwanted or unexpected behavior of the instrument.
 Switch off all HPLC modules, before plugging/unplugging the Instant Pilot.
1.
2.