G4208A User’s Guide 117
4 Running Multiple-Vial Analyses
Analyzing Multiple Vials Using the Same Method
Analyzing Multiple Vials Using the Same Method
This section describes how to set up a 25- vial analysis with one injection from
each vial. You will use a previously created method. The samples are located in
positions 1 to 25 of the autosampler tray. For details see
“Working with
Methods” on page 64.
1 Enter the Sequence screen.
2 Enter Wizard.
3 Enter first ...
4 Enter last ...
If the current method is used, loading is not required.
To Next Page
Loading...
