G4208A User’s Guide 26
1 Start-up Information
Basic Operational Concept of the Instant Pilot
Basic Operational Concept of the Instant Pilot
Below is the new operation concept of the Instant Pilot described.
Configuration
These parameters allow setup of the instrument configuration. Typically, these
configurations are linked to properties of the instrument (e.g. module names,
flow path volumes, analog output configuration, LAN address) that are set up
only at installation or after modification of the instrument setup.
Method & Timetable
All parameters that have an influence on the analysis result. Chemists change
these parameters to set up optimal conditions for a certain analysis.
Control Button
All control menu items directly trigger a day- to- day action on the instrument
outside an analysis. The control menu can be opened in major screens via the
Control button. Typical functions are detector balancing, or getting the
instrument in a “ready for analysis” state.
Diagnosis
Diagnosis tests allow the checking of proper operation. They only report the state
of a module with a passed / failed result and do not modify anything on the
instrument.
Maintenance
Maintenance shows the logs for maintenance- relevant events, allows access to
EMF (early maintenance) settings and functions needed for maintenance tasks
(e.g. calibration routines, parts information).
To Next Page
Loading...
Need help?
General
